Email us!

Custom Orthotics: A Complete Guide for Clinics

Written by Orthix team · Last updated

Quick answer

Custom orthotics are removable in-shoe devices made for one patient from a three-dimensional model of the foot, after a clinical assessment. The clinic assesses the patient, captures the foot as a foam impression or 3D foot model, sends a prescription to a lab, then fits the pair and follows up. Orthix makes them for clinics across Canada.

Key takeaways

  • A custom orthotic is made from a three-dimensional model of one patient's foot to meet a need found in a clinical assessment.[1][2]
  • Who may assess, prescribe and dispense depends on your profession and province, so check with your regulatory college.
  • Most devices sit on a spectrum between functional (support and control) and accommodative (cushioning and pressure relief).
  • Clear clinical goals, a good capture and a complete prescription drive what the lab builds; follow-up after fitting matters as much as the device.
  • At Orthix, typical fabrication is 5–10 days after lab acceptance, and orthotics come with a 6-month guarantee.

What are custom orthotics?

Custom orthotics, also called custom foot orthoses, are removable devices worn inside footwear and made for one person. The Pedorthic Association of Canada describes them as medical insoles designed and manufactured from a specific individual's feet and footwear to address a need found during a clinical assessment by a qualified footcare professional.[1] The College of Chiropodists of Ontario defines a prescription custom foot orthosis as a device derived from a three-dimensional representation of the patient's foot, made of materials suited to the patient's condition, and either functional or accommodative.[2]

That definition excludes much of what is sold as “custom”. The same Ontario standard says a customized prefabricated device, or a device shaped by a self-moulding process, is not a custom-made foot orthosis.[2] For clinics, the practical line is simple: a custom device starts with an assessment and a three-dimensional model of the patient's foot, and the lab builds it to a written prescription.

What does the research say?

Evidence varies by condition, so clinical judgment and follow-up matter. A Cochrane review of custom-made foot orthoses for foot pain found that, in adults with painful high-arched feet (pes cavus), custom orthoses reduced foot pain after three months compared with sham devices, while for plantar heel pain they may not reduce pain more than sham or non-custom devices.[3] The review also lists reported adverse effects, including additional foot pain, ankle instability and skin irritation.[3]

Prescribing habits differ too. A survey of 264 podiatrists, most practising in the UK, Australia and New Zealand, found wide variation between countries and conditions in when customised rather than prefabricated devices were chosen.[4] Use the research to set realistic expectations with patients, and record the goal of each device so you can check it at follow-up.

Who assesses, prescribes and dispenses custom orthotics in Canada?

The rules depend on your profession and your province. Before you launch or expand an orthotics service, confirm with your regulatory college who on your team may assess, prescribe, cast and dispense. The guide to adding custom orthotics to your clinic walks through the care pathway.

Functional, accommodative, or both?

Functional devices use a supportive shell and its shape to influence how load moves through the foot. Accommodative devices cushion, protect and redistribute pressure. Many devices combine both aims, so the prescription should state which intent the lab is building to.

At Orthix, clinics order from nine device families: Dress, Diabetic, Marathon, Casual, Sport, Safety Medix, UCBL, Super Soft and Super Flex. Product families are ordering categories; diagnosis and prescription decisions remain with the clinician.

How do clinics capture the foot?

The lab needs a three-dimensional model of the foot. Orthix accepts foam impressions and acceptable 3D foot model files, and clinics can capture a 3D foot model with a phone or iPad in the Orthix app. Digital orders don't need foam.

Casting position matters, and some colleges specify it. How the foot is positioned can matter more than the tool used.

What goes on an orthotic prescription?

The prescription is the lab's instruction set. Whatever your profession, clear clinical goals, the footwear the device will live in, and left and right differences take the guesswork out for the lab. At Orthix, accommodations and additions chosen at ordering are included free.

From order to fitting: the custom orthotics lifecycle

1. Assess and consent. 2. Capture. 3. Order. 4. Lab review and acceptance. At Orthix, typical fabrication is 5–10 days after lab acceptance. 5. Shipping. Shipping is $8 per pair for clinics ordering under 20 pairs per month, and free for clinics ordering 20 or more pairs per month. 6. Fitting. 7. Follow-up and remakes. Orthix orthotics come with a 6-month guarantee, and remakes are reviewed under it.

Make them in-house or work with a lab?

Some clinics fabricate devices themselves; many send prescriptions to an outside lab. The choice comes down to equipment, space, trained staff time, quality control and cash flow.

How do you choose a lab?

Compare labs on facts you can check: when the turnaround clock starts, how orders are placed and which capture methods are accepted, the guarantee and how remakes are handled, shipping to your province, and how you reach the lab for support. Orthix answers each point on its page about working with a custom orthotics lab in Canada.

Frequently asked questions

What is the difference between custom and prefabricated orthotics?

A custom orthotic is made for one patient from a three-dimensional model of their foot, following a clinical assessment. A prefabricated device is mass-produced to a generic shape, and adjusting one does not make it custom-made.

Who can prescribe custom orthotics in Canada?

It depends on the profession and the province. Confirm with your regulatory college who on your team may assess, prescribe and dispense custom orthotics before you design the service.

How long does it take to get custom orthotics from Orthix?

At Orthix, typical fabrication is 5–10 days after lab acceptance. Volume and product type can vary, and shipping time to the clinic is separate.

Does Orthix work with patients directly?

No. Orthix works only with clinics and practitioners, and finished orthotics ship to the clinic.

Do clinics need a scanner to order from Orthix?

No dedicated scanner is required. Clinics capture a 3D foot model with a phone or iPad in the Orthix app, and Orthix also accepts acceptable 3D foot model files and foam impressions.

Sources

  1. Pedorthic Association of Canada. Custom-Made Foot Orthotics. 2024. https://pedorthic.ca/services/custom-orthotics/ Accessed 2026-11-13.
  2. College of Chiropodists of Ontario. Practice Standard: Prescription Custom Foot Orthoses (amended October 1, 2026). 2026. https://www.cocoo.on.ca/pdf/standards/SOP-Prescription-Custom-Foot-Orthoses-2026-10.pdf Accessed 2026-11-13.
  3. Hawke F, Burns J, Radford JA, du Toit V. Custom-made foot orthoses for the treatment of foot pain. 2008. https://www.cochrane.org/evidence/CD006801_custom-made-foot-orthoses-treatment-foot-pain Accessed 2026-11-13.
  4. Chapman LS, Redmond AC, Landorf KB, et al. A survey of foot orthoses prescription habits amongst podiatrists in the UK, Australia and New Zealand. 2018. https://pmc.ncbi.nlm.nih.gov/articles/PMC6258496/ Accessed 2026-11-13.

Related guides

GuideNew

In-House vs Outsourced Custom Orthotics

Equipment, staff time, quality control, remakes and cash flow compared, with a decision table.

pedorthistspodiatristswellness clinicsphysiotherapistschiropractors
Browse all Orthotic types and devices resources →

Free first pair for clinics that switch

Orthix is a custom orthotics lab in Vancouver, BC, serving clinics across Canada. Order online in the Orthix app.