Foam Box Impression Checklist for Clinics
Written by Orthix team · Last updated
Quick answer
Key takeaways
- Check your college's casting rules first; some don't accept semi-weight-bearing foam impressions for custom devices.[1]
- Control the foot's position throughout the impression.[2]
- Inspect every impression before the patient leaves, and retake any doubtful one.[1]
- Label each box so it matches the order exactly, left and right.
- Protect impressions from crushing and heat on the way to the lab.
Before you start: check your college's casting rules
Foam box casting is one of several ways to capture the foot for a custom device. Some regulators are more specific. Check your own college’s standard before you build a workflow around foam.
What you need
Foam impression boxes, a stable chair, the completed assessment and order, labels, a protective outer carton, and the lab’s instructions. Orthix clinics can get current instructions from the lab at info@orthix.ca or +1 (604) 447-2880.
Step by step: taking the impression
1. Explain the process. 2. Position the patient. 3. Set the foot’s posture. 4. Press evenly. 5. Withdraw straight up. 6. Repeat for the other foot in a fresh box.
Step by step: checking the impression before the patient leaves
Look for a shallow heel, missing arch contour, unclear metatarsal heads or toes, a double outline, bottoming out, torn foam, finger dents or damaged edges. Retake a doubtful impression before the patient leaves.
Labelling
Label the outside of each box, never the impression itself, with left or right, the patient identifier used on the order, the clinic name, the order reference and the date.
Packing and sending
Close the lid without touching the impression. Pack both boxes upright and snug in a sturdy outer carton, with filler so they cannot shift. Keep the carton away from heat, send it promptly and keep the tracking number with the order record.
At Orthix, typical fabrication is 5–10 days after lab acceptance, so the clock starts when the lab accepts the order, not when the box leaves your clinic.
Common foam impression mistakes
Common mistakes include sliding the foot, too much or too little load, pressing fingers into the foam, missing labels, crushing the box in transit and not checking the impression before the patient leaves.
When a 3D foot model is the simpler route
Digital orders don't need foam. Clinics can capture a 3D foot model with a phone or iPad in the Orthix app and submit it online, so there is no box to pack or send, and a recapture is a new file rather than a new shipment. Orthix also accepts acceptable 3D foot model files.
Frequently asked questions
Does Orthix accept foam box impressions?
Yes. Orthix accepts foam impressions and acceptable 3D foot model files, and clinics can also capture a 3D foot model with a phone or iPad in the Orthix app.
Should a foam box impression be taken sitting or standing?
Use the position your assessment, training and college standard call for. The Pedorthic Association of Canada describes foam box casting with the patient sitting or standing, and some colleges require non-weight-bearing casts instead of foam.
How should a clinic label a foam box impression?
Label the outside of each box with left or right, the patient identifier used on the order, the clinic name, the order reference and the date, matched exactly to the order.
Do clinics need foam to order from Orthix?
No. Digital orders don't need foam. Clinics can capture a 3D foot model with a phone or iPad in the Orthix app.
Sources
- College of Chiropodists of Ontario. Practice Standard: Prescription Custom Foot Orthoses. 2026. https://www.cocoo.on.ca/pdf/standards/SOP-Prescription-Custom-Foot-Orthoses-2026-10.pdf Accessed 2026-11-13.
- Pedorthic Association of Canada. Getting the Perfect Fit. 2021. https://pedorthic.ca/services/custom-orthotics/getting-the-perfect-fit/ Accessed 2026-11-13.
- Chhikara K, Suresh S, Morrison S, et al. Does Scanner Choice Matter for the Design of Foot Orthosis?. 2025. https://pmc.ncbi.nlm.nih.gov/articles/PMC11820986/ Accessed 2026-11-13.
Related guides
Foam Box vs 3D Foot Models for Custom Orthotics
A short decision guide to choosing a foam box or a 3D foot model for each visit.
How to Capture Feet on a Phone or iPad
Room set-up, both soles, 3D foot model review and avoiding sent-back files.
The Custom Orthotics Fitting Process for Clinics
Checking the pair, fitting it in footwear, wear-in advice, records, follow-up and remakes.
Free first pair for clinics that switch
Orthix is a custom orthotics lab in Vancouver, BC, serving clinics across Canada. Order online in the Orthix app.